CONSTRUCTION FEATURES
Close-coupled, single-impeller centrifugal pump with axial suction and radial delivery.
Threaded suction and delivery ports (Rp ISO 7).
Compact construction; adaptor for motor/pump coupling; the impeller is keyed directly to the motor shaft extension.
Back pull-out design; no need to disconnect the pump body from the system pipes.
AISI 316L stainless steel open impeller with four pressed vanes welded onto base disk.
Impellers front wear surface consists of a study AISI 316L stainless steel plate welded onto the suction port.
AISI 316L stainless steel pump body and seal housing disk, with no diffusers or cavities for easier cleaning and maintenance.
Pump body tightened by 8 screws allowing rotation of the discharge head.
Mechanical seal:
Standard version: Carbon/
Ceramica faces, FPM elastomers.
The other parts are made of AISI 316L stainless steel.
K version : faces are made of Silicon Carbide and Tungsten Carbide. FPM Elastomers.
The other parts are made of AISI 316L stainless steel.
FPM O-Rings.
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally by next working day courier if order is placed before 1.30pm. ie despatched on Monday for Tuesday delivery. If placed after 1.30pm then the goods will be despatched the next working day. ie Monday for Wednesday delivery. Highlands and offshore deliveries differ.