Ebara 2CDX/I 120/30
2CDX-2CDXL
Surface
DUAL IMPELLER CENTRIFUGAL ELECTRIC PUMPS
in AISI 304 and in AISI 316
APPLICATIONS
Domestic pressure boosting
Small-scale garden irrigation
Micro Brewing
Washing
Treating water
Cooling towers
Moving clean water in general
TECHNICAL DETAILS
Strong structure
Small dimensions
PUMP TECHNICAL DATA
Maximum working pressure: 8 bar
Maximum temperature of the liquid:
-5°C ÷ +60°C for standard and E version
-5°C ÷ +110° for H-HS-HW-HSW version
G1½ suction connection for 2CDX 200, G1¼; for the rest of the range
G1 discharge connection
MOTOR TECHNICAL DATA
High efficiency motors IE2 starting from 0,75kW
Self-ventilated 2 pole asynchronous motor
Class of insulation F
IP55 Protection degree
230V ±10%, 50Hz single phase voltage
230/400V ±10%, 50Hz three phase voltage
Permanent capacitor inserted and thermo-amperometric protection
with automatic rearm incorporated for the single phase motor
Protection under user's responsibility for the three phase version
MATERIALS
Version AISI304
Pump casing, impeller, shaft, diffuser and seal housing disc in EN 1.4301 (AISI 304)
Version (L) AISI316
Pump casing, impeller, shaft, diffuser and seal housing disc in AISI 316
Aluminium motor bracket (up to 1.5 kW included),
in cast iron (2.2 kW and above)
Mechanical seal in:
- Ceramic/Carbon/NBR (standard)
- Ceramic/Carbon/FPM (H version )
- SiC/SiC/FPM (HS version)
- Tungsten carbide/Tungsten carbide/FPM (HW version)
- SiC/Tungsten carbide/FPM (HSW version)
- Ceramic/Graphite/EPDM (E version)
- Tungsten carbide/Special carbon/EPDM (U3CEGG version)
The code on my pump is different
The code has changed many times due to motor efficiency regulations, EuP/ErP and there has been harmonisation across Europe also. The base code is the 2CDX or 2CDXM denoting three phase and single phase respectfully.
After 2CDX or 2CDXM there is another code letter
This code letter after the 2CDX or 2CDXM code is for the motor efficiency rating. Around 2013 the codes were /A, /B or /E denoting their IE rating. You can disregard this rating as we will supply the current IE rated motor to meet European legislation. If you would like to know more about the legislation then Google ErP/EuP or contact us and we can provide.
What are the additional codes
The additional code that denotes the seal materials are: H = Viton HS = Silicon with Viton E = EPDM For example 2CDXHM 70/10 is a 2CDX pump with single phase and Viton elastomers for up to 110 Deg C, 2CDXHS 70/10 is a 2CDX pump with 3 phase and Silicon vs. Silicon with Viton elastomers for 110 Deg C and soft solids
UK Mainland Delivery is normally by next working day courier if order is placed before 1.30pm. ie despatched on Monday for Tuesday delivery. If placed after 1.30pm then the goods will be despatched the next working day. ie Monday for Wednesday delivery. Highlands and offshore deliveries differ.