Technical data
Max. immersion 7 m
Max. temperature of the liquid (seepage water) 40°C
Maximum length of fibres
195 mm (65DLW/C)
240 mm (80DLW/C)
300 mm (100DLW/C)
Max. solids passage
35 mm (65DLW/C)
50 mm (80DLW/C)
60 mm (100DLB W/C)
Poles 4
Insulation class F
Protection degree IP68
Voltage Three phase 3~380-415±10% (1,5-7,5kW)
Materials
Pump body Cast iron
Impeller Cast iron
Shaft AISI 403 (EN 1.4006)
Mechanical seal Impeller side: SiC/SiC/NBR
Motor side: Carbon/Ceramic/NBR
The pump does not have an internal motor protector, therefore overload protection must be provided by the user.
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally by three working weeks if not in UK stock. Limited UK stocks so please allow the 3 working weeks from factory.