CM(A-B-C-D) - CMR
Surface
code Single-impeller
SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS
in cast iron
APPLICATIONS
Pressure boosting domestic plants
Small-scale irrigation
Moving non-aggressive liquids for civil and industrial use
Washing plants
Washing vehicles
TECHNICAL DETAILS
Available with brass impeller (CMA 0.50 M GO, CMA 0.75 M GO,
CMA 1.00 M GO)
The CMR version is equipped with an open impeller
They can be inserted into machinery for industrial use
PUMP TECHNICAL DATA
Maximum working pressure:
- 6 bar for CMA 0.50 - 0.75 - 1.000.50 - 0.75 - 1.00, CMB 0.75 - 1.00 - 1.50 - 2.00 -
3.00, CMC , CMD , CMR
- 8 bar for CMA 1.50 - 2.00 - 3.00, CMB 4.00 - 5.50
Maximum temperature of the liquid:
- 40°C for CMA 0.50 - 0.75 - 1.000.50 - 0.75 - 1.00
- 90°C for the rest of the range
G1 suction connection for CMA 0.50 - 0.75 - 1.000.50 - 0.75 - 1.00,
G1¼ for CMA 1.50 - 2.00 - 3.00,G2 for CMB - CMC,
G2½ for CMD
G1 discharge connection for CMA, G1¼; for CMB, G1½ for CMR,
G2 for CMC, G2½ for CMD
MEI> 0,7(CMA - CMC), MEI > 0,60 (CMB - CMD)
For further information please see our Data Book
MOTOR TECHNICAL DATA
High efficiency motors IE2 starting from 0,75kW
Self-ventilated 2 pole asynchronous motor
Class of insulation F
IP44 Protection degree
230V ±10%, 50Hz single phase voltage,
230/400V ±10%, 50Hz three phase voltage
Permanent capacitor inserted and thermo-amperometric protection
with automatic rearm incorporated for the single phase motor
Protection under user's responsibility for the three phase version
MATERIALS
Cast iron pump casing
Mechanical seal in Carbon/Ceramic/NBR
Impeller:
- in PPE+PS reinforced with fibreglass for CMA 0.50 - 0.75 - 1.000.50 - 0.75 - 1.00
- in brass for CMA 1.50 - 2.00 - 3.00, CMB 2.00 - 3.00 - 4.00 - 5.50, CMR 0.75-1.00
- in cast iron for CMB 0.50 - 0.75 - 1.000.50 - 0.75 - 1.00, CMC, CMD
Shaft:
- in AISI 416 (integral) for CMA 0.50
- in AISI 303 (part in contact with the liquid) for CMA CMA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMB 0.75 - 1.00, 1.50 - 2.00 - 3.00, CMC 0.75 - 1.00
CMD 1.50 - 2.00 - 3.00, CMR 0.75-1.00
- in AISI 304 (part in contact with the liquid) for CMB 4.00 - 5.50, CMD 4.00
Bracket:
- in aluminium for CMA 0.50 - 0.75 - 1.000.50 - 0.75 - 1.00, CMB 0.75 - 1.00,
CMC 0.75 - 1.00, CMR 0.75-1.00
- in cast iron for the rest of the range
Is this the same pump fitted to Bridgeport machines
Yes it is the same pump
The pump you have supplied does not have CMA1.00TS on the nameplate
Ebara no longer produce the pump as a CMA1.00TS (50/60HZ) as the contract with Bridgeport has finished. We supply the CMA1.00T GO with the TS seal change which is the same but for the 50HZ market only.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally by next working day courier if order is placed before 1.30pm. ie despatched on Monday for Tuesday delivery. If placed after 1.30pm then the goods will be despatched the next working day. ie Monday for Wednesday delivery. Highlands and offshore deliveries differ.