Technical data
Pump
Pump model J 1-110 G10
Q.max 22 m³/h - 370 l/min (96 USGPM)
H.max 15 m (49 ft)
Suction port threaded - 1 1/2" BSP
Delivery port threaded - 1 1/2" BSP
Impeller type semi-open, 3 vanes
Solids handling 25 mm (1.0 ")
Casing EN-GJL-200 cast iron
Impeller EN-GJL-200 cast iron
Wear plate EN-GJL-200 cast iron
Non-return valve check-valve, NBR
Shaft C45 steel
Mechanical seal Silicon carbide / Silicon carbide
Elastomers NBR
Lubrication grease
Motor
Supply electric
Type three-phase TEFC
No. poles 2
Tension supply 230-400 V
Frequency 50 Hz
Rated power 1.1 kW - 3 HP
Rated speed 2.900 rpm
Rated current, In (400V) 4,6 A
Class efficiency IE3 - IEC 60034-30
Max efficiency 84,0 %
Protection rating IP55
Insulation class F
Rpm type fixed
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally by next working day courier if order is placed before 1.30pm. ie despatched on Monday for Tuesday delivery. If placed after 1.30pm then the goods will be despatched the next working day. ie Monday for Wednesday delivery. Highlands and offshore deliveries differ.
