Applications
For water supply.
For domestic use, for garden use and irrigation.
Features
• high efficiency asynchronous single-phase motor
• capacitor less stressed in voltage
• uniform and lower motor temperature
• motor power control
• programmable re-start pressure
• programmable stop pressure
• no hydraulic losses due to the measuring devices
• voltage and current control
• monitoring of maximum starting current
Protections
• dry-run protection
• overload control and overheating motor control
• pump blockage
• power supply control
• starts per hour control
Operating conditions
Liquid temperature: 0 °C to +35 °C (0 °C to +50 °C for E-MXP).
Ambient temperature up to +40 °C.
Maximum permissible pressure in the pump casing: 8 bar.
Continuous duty.
Motor
2-pole induction motor, 50 Hz (n ˜ 2800 rpm).
Single-phase 230 V ± 10%, with thermal protector.
Capacitor inside the terminal box.
Cable: H07RN-F, 3G1,5 mm2
, length 1,5 m, with plug CEI-UNEL
47166.
Insulation class F.
Protection IP X4.
Constructed in accordance with: EN 60034-1;
EN 60335-1, EN 60335-2-41.
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally 2/3 day courier if order is placed before 1.30pm. If placed after 1.30pm then the goods will be despatched the next working day. Next working day delivery is available if in UK stock, please enquire. Highlands and offshore deliveries differ.
