Ebara Re-Seller | **Discounts for registered account holders** | 20+ Years of Trading Ebara | Free UK Mainland Carriage over 100

Pressure Switches

Digital pressure switches, on demand pressure switches.
Coelbo Switchmatic_2_T-Kit

Coelbo Switchmatic_2_T-Kit

Electronic pressure switch with integrated 3 way fitting incorporating a non return valve.
Complete pump protection
Dry Run
Overload
Rapid recycle(bladded failure)
Compact and easily set up and adjusted
110v or 230v single phase
16 Amp rated

Brochure
96.00 (Ex VAT)
Coelbo Kit_PS2

Coelbo Kit_PS2

Coelbo Kit PS2 adjustable presure switch with intergrated gauge and 3 x 1" bsp hydraulic connections
1 - 1" male & 2 - 1" female

12A
2HP
IP20
Cut in pressure range 1.4 bar to 2.8 Bar

33.00 (Ex VAT)
Coelbo Digimatic 2

Coelbo Digimatic 2

Coelbo Digimatic 2, 1"
Presure Flow Control and protection

Automatic digital pump-driver for electric pump integral control and protection.
The DIGIMATIC is a compact device for the automatic control and protection of electric single-phase pumps up to 3 HP (2,2 kW).
This unit includes all the characteristics and functions of the traditional electronic pump controllers: electronic flow sensor, integrated accumulation membrane, integrated check-valve, warning led-lights in electronic circuit that guides the electric pump operation and keeps pressure and flow accordingly.
Moreover, it has an internal pressure transmitter and instantaneous current sensor (only Digimatic 2), providing additional features: the starting pressure can be adjusted with high accuracy, there is a digital pressure gauge and over-current protection adaptable to each pump.

Voltage - 1phase 110-230 V (multiVolt)
Frequency - 50/60 Hz
Maximum Current - 16 A
Power - 2,2 kW
Maximum Pressure - 8 bar
Start Pressure - 0,5 ÷ 4 bar
Protection degree - IP65
Maximum temperature - 60 ºC
Net weight - 1,3 kg
Maximum flow - 8.000 l/h
95.00 (Ex VAT)
Coelbo Digiplus

Coelbo Digiplus

Coelbo Digiplus, 1 1/4"
Presure Flow Control and protection

Automatic digital pump-driver for electric pump integral control and protection.
The Digiplus is a compact device for the automatic control and protection of electric single-phase pumps up to 3 HP (2,2 kW).
This unit includes all the characteristics and functions of the traditional electronic pump controllers: flow sensor, integrated accumulation membrane, integrated check-valve, warning led-lights.
It can operate in pressure dependent mode (cut-in and cut-out pressures) or on-off mode (start pressure and stop by no flow).
Moreover, it has an internal pressure transmitter and instantaneous current sensor, providing additional features: the pressures can be adjusted with high accuracy, there is a digital pressure gauge and over-current protection adaptable to the pump.

Voltage - 1~110-230 V (multiVolt)
Frequency - 50/60 Hz
Maximum Current - 16 A
Power - 2,2 kW
Stop Pressure - 1-8 bar
Start Pressure - 0,5 - 7 bar
Protection degree - IP65
Maximum temperature - 50 ºC
Net weight - 1,3 kg
Maximum flow - 10.000 l/h
115.00 (Ex VAT)
Coelbo PS2/1.5-5.5

Coelbo PS2/1.5-5.5

Coelbo PS2 1.5 to 5.5 adjustable presure switch

12A
2HP
IP20
Factory Setting 1.4 bar to 2.8 Bar
1/4 bsp female connection
10.70 (Ex VAT)
See More
OUT OF STOCK
Coelbo PS2/4-10.5

Coelbo PS2/4-10.5

Coelbo PS2 4 to 10.5 adjustable presure switch

12A
2HP
IP20
Cut in pressure range 4 bar to 5.5 Bar
1/4 bsp female connection
15.00 (Ex VAT)
Coelbo PS2+/1-6.5

Coelbo PS2+/1-6.5

Coelbo PS2+ 1 to 6.5 adjustable presure switch

16A
2HP
IP54
Cut in pressure range 1.4 bar to 2.8 Bar
1/4 bsp female connection
18.60 (Ex VAT)

Get our best prices!

To get our very best prices,Up to 64% off, you need to register for an account.Existing accounts have been allocated

You can do this when placing an order or you can click here to register for an account now.

Please enquire before ordering at Admin@centrifugalpumps.co.uk or call us on +44 (0) 161 428 0133.

Show message again