Hydraulic specifications
Maximum capacity : 62 lt/min
Maximum head : 36 m
Gasket on the shaft: Mechanical gasket
Maximum priming height : 6 m
Threaded ports: 1"
Maximum liquid density 1.1g/cm free of hard particles
in suspension
Maximum temperature 90°C
Not suitable for aggressive liquids towards pump
construction materials and gaskets (see technical
specifications)
Not appropriate for the transfer of petrol, solvents
and, in general, in environments with risk of explosion
and fire
Unidirectional pumping flow
Coupling with impeller locked
Possibility of working for short periods with closed
pipes
During installation, the pump must be filled with liquid,
subsequently this operation is no longer necessary
Technical specifications
Material
Pump Parts: AISI 304
Counterflange: AISI 304
Shaft : AISI 316
Impeller : Tecnopolimero
Gaskets: NBR
Mechanical gasket ceramic/graphite/nbr
MOTOR
Powered with a Dc motor 24V
Equipped with MEC 63 motor (27 00 rpm 0.7 HP / 0,5
KW)
Service S1
Ip protection degree 23
Power supply connection via terminal board on the
motor
The Part number is different
The minimum pressure these pumps require is 2 meter's, if you do not have 2 meter’s differential from water level to discharge point,or a minimum of 14 meter's horizontal run, then use a 1" bore discharge hose or your motor will burn out
What is the lowest head pressure
Part numbers have changed to harmonise along with design changes. The part number stated is the current one in use, there are different numbers for OEM products also, if you have any doubts please advise the part number and we will confirm.
Discounts
Further quantity discounts are available for this product range, call the office for details 0161 428 0133
UK Mainland Delivery is normally by next working day courier if order is placed before 1.30pm. ie despatched on Monday for Tuesday delivery. If placed after 1.30pm then the goods will be despatched the next working day. ie Monday for Wednesday delivery. Highlands and offshore deliveries differ.
